Foxconn 761MX User Manual
Page 28
Chapter 2 BIOS Description
23
1.2 Time(hh:mm:ss)
This option allows you to set up the desired time (usually as the current time)
with
1.3 IDE Channel 0 Master/Slave,IDE channel 2/3 Master
These categories identify the HDD types of 3 IDE channels installed in the computer
system. There are three choices provided for the Enhanced IDE BIOS: None, Auto, and
Manual. “None” means no HDD is installed or set; “Auto” means the system can auto-
detect the hard disk when booting up; by choosing “Manual” and changing Access
Mode to “CHS”, the related information should be entered manually. Enter the informa
tion directly from the keyboard and press < Enter>:
Cylinder number of cylinders
Head
number of heads
Precomp write pre-compensation
Landing Zone
landing zone
Sector number of sectors
Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large or Auto mode.
CHS
For HDD<528MB
LBA
For HDD>528MB & supporting LBA (Logical Block Addressing)
Large
For HDD>528MB but not supporting LBA
Auto
Recommended mode
1.4 Drive A
This option allows you to select the kind of FDD to be installed,including“None”,
[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in].
1.5 Halt On
This category determines whether or not the computer will stop if an error is
detected during powering up.
All Errors
Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.
No Errors
The system boot will not stop for any errors that may
be detected.
All, But Keyboard
The system boot will not stop for a keyboard error; but
it will stop for all other errors.
All, But Diskette
The system boot will not stop for a diskette error; but
it will stop for all other errors.
All, But Disk/Key
The system boot will not stop for a keyboard or disk error,
but it will stop for all other errors
1.6 Installed Memory
This item is used to show the installed memory of the system.
PDF 文件使用 "pdfFactory" 试用版本创建