Foxconn 761MX User Manual

Page 31

Chapter 2 BIOS Description

3.12 Delay For HDD [Secs]

This item is used to support some old models or special types of hard disks

or CD-ROMs.They may need a longer amount of time to initialize and prepare

for activation. Since the BIOS may not detect those kinds of devices during

system booting.You can adjust the value to fit such devices. Larger values will

give more delay time to the device. The minimum number you can enter is 0,
and the maximum number you can enter is 15.The default setting is 3.

3.13 Full Screen Show

This item is used to set whether to show the logo in full screen or not when
start system.

3.14 Small Logo [EPA] Show

This item is used to set whether to show the EPA logo or not when start system.

4. Advanced Chipset Features

Advanced Chipset Features

4.1 DRAM Configuration

Press “Enter” to set parameters of DRAM ,such as memory clock frequency
and so on. You ‘d better keep the default values unchanged.

4.2 Hypertransport Control

This item is used to control Hypertransport.Press “Enter” key,you are able to

set the Hypertransport width and speed.

4.3 OnChip VGA Control
This item is used to control OnChip VGA.Press “Enter” key ,you are able to set
the VGA Shared Memory size,Graphics Engin frequency and the GUI Memory
Clock frequency.

PDF 文件使用 "pdfFactory" 试用版本创建