Foxconn 761MX User Manual
Page 33
Chapter 2 BIOS Description
28
manage system hardware. In order to use this function the ACPI specification
must be suported by the OS (for example, Windows2000 or WindowsXP). The
available setting values are: Enabled and Disabled.
6.2
ACPI Suspend Type
ACPI stands for “Advanced Configuration and Power Interface”. ACPI is a
standard that defines power and configuration management interfaces be-
tween an operating system and the BIOS. In other words, it is a standard
that describes how computer components work together to manage
system hardware. In order to use this function the ACPI specification must
be sup ported by the OS (for example, Windows2000 or WindowsXP). The
available setting values are: Enabled and Disabled.
6.3 Switch Function
This item is used to enable or disable switch function to wake up.
6.4
Power Button Override
This item is used to set the power down method. This function is only valid
for systems using an ATX power supply.When “Instant Off” is selected, press
the power switch to immediately turn off power. When “Delay 4 Sec” is selected,
press and hold the power button for four seconds to turn off power.
6.5
Power State Resume Control
This item is used to control power resume state.
6.6
PM Wake Up Events
Press Enter to set the parameters of Power Management Wake Up Events.
6.7 HPET Support
This item is used to enable or disable HPET.
6.8
HPET Mode
This item is used to select HPET Mode.
7.PnP/PCI Configuration
PnP/PCI Configuration
7.1
Init Display First
This option is used to set which display device will be used first when start up PC .
PDF 文件使用 "pdfFactory" 试用版本创建