Foxconn 761MX User Manual

Page 34

Chapter 2 BIOS Description

7.2 Resource controlled By

This option is used to define the system resource control scheme. If
allcards you use support PnP, then select Auto (ESCD) and the BIOS auto-
matically distributes interruption resources. If you install ISA cards not
supporting PnP, you will need to select “Manual” and manually adjust
interruption resources in the event of hardware conflicts. However, since this
motherboard has no ISA slot, this option does not apply.

7.3 IRQ Resources

If you set “Resources Controlled By” for “Manual”, you can modify the item.
Press the key, then manually set IRQ resources.

7.4

PCI /VGA Palette Snoop

If you use a non-standard VGA card, use this option to solve graphic accel
eration card or MPEG audio card problems (e.g., colors not accurately
displayed).

7.5

PCI Express relative items**

Maximum ASPM susported

Control maximum level of ASPM supported on the given PCI Express links
on the system.

7.6

Maximum Payload Size

This option is used to maximum TLP payload size for PCI Express devices.
The unit is byte.

8. PC Health Status

PC Health Status

8.1

Case Open Warning

This option is used to enable or disable case open warning function.

8.2

Shutdown Temperature

This item is used to set upper limitation of system temperature.When the
temperature is higher than the setting values, the motherboard will auto-
matically cut off the power of computer.

8.3

CPU Vcore/+1.8V/+3.3V/+5V/+12V

The current voltages will be automatically detected by the system.

PDF 文件使用 "pdfFactory" 试用版本创建