Fluke Biomedical HHC3 - Manual (Page 62)

HHC3
Users Manual
4-10
Error Messages
If you have not selected and clicked one of the ports on the CONNECTION
button, an error message appears as follows:
ems010s.bmp
Click the OK button and select a serial or USB port.
A warning message appears as follows soon after USB port selection.
ems011s.bmp
Click the OK button and select the COM port allocated for USB.
If you have clicked the CONNECTION button but have not selected a COM
port, an error message appears as follows:
ems012s.bmp
Click the OK button and select the COM port.