Using the application software, Introduction, Installing the hhc-utility software – Fluke Biomedical HHC3 User Manual

Page 53: Chapter 4

Text mode
Original mode

4-1

Chapter 4

Using the Application Software

Introduction

Use the HHC-Utility software to upload and download user-defined sequences
from and to a PC. Upload gets the user-defined sequences defined in the
Controller and saves them in a text file on the PC. Download sends the user-
defined sequences saved in a text file on the PC to the Controller.

Installing the HHC-Utility Software

Note

Install the software prior to connecting the hardware.

Select Start | Run | SetUp.exe to install the HHC-Utility software. Soon after
the installation starts, click the Next > button; a window appears as follows:

ems027s.bmp