Fluke Biomedical HHC3 - Manual (Page 15)

2-1
Chapter 2
Using the Controller
Controls and Connectors
Refer to Figures 2-1 and 2-2 and Table 2-1 for an introduction to the controls
and connectors.
Connecting the Controller to a Simulator
Use the Serial Interface Cable (PN 2712829) for connecting to the medSim
300B simulator. Use the Serial Interface Cable (PN 2702279) for connecting to
the MPS450 or Marq III simulator. Refer to Figure 2-3 for a sample view of
the connection to the MPS450.
Connecting the Controller to a PC
Chapter 4 describes software installation and hardware connections for
uploading and downloading files.