beautypg.com

Fluke Biomedical HHC3 User Manual

Page 29

background image

Programming User Sequences

Defining User Sequences

3

3-3

4. Press the second digit of the user-programmable dual keys. The display

shows:

5. Press Q to begin entering the dual key command. The display shows:

6. Press the first digit (from B to J) of the chosen two-digit waveform.

The display shows:

7. Press the second digit (from B to P) for the chosen two-digit

waveform. If the two-digit waveform number just entered is an immediate
command, the display shows the corresponding command description. For
example, if you pressed the dual keys C B, the display changes to:

8. Press T to define the new user sequence. The display changes to:

See also other documents in the category Fluke Biomedical Equipment: