Fluke Biomedical ULT800 - Manual (Page 23)

Ultrasound Transducer Leakage Current Tester
Maintenance
13
• Do not operate the Product with covers removed or the
case open. Hazardous voltage exposure is possible.
• Use only specified replacement parts.
• Have an approved technician repair the Product.
For safe operation and maintenance of the Product:
• Repair the Product before use if the battery leaks.
• Do not short the battery terminals together.
• Keep cells and battery packs clean and dry. Clean dirty
connectors with a dry, clean cloth.
Cleaning
 Caution
Do not put fluid on the Product surface. Fluid leakage into
the electrical circuitry may cause the Product to fail.
 Caution
Do not use spray cleaners on the Product. This can push
fluid into the Product and cause electronic component
damage.
Clean the ULT800 occasionally; use a damp cloth and mild
detergent. Take care to prevent the entrance of liquids.
Wipe down the adapter cables with the same care. Inspect them for
damage to and deterioration of the insulation. Check the
connections for integrity. Keep transducer adapter clean and dry.