Fluke Biomedical ULT800 - Manual (Page 18)

ULT800
Users Guide
8
Figures 2 and 3 show some typical test setups. You can use other
setups, as long as you observe the following rules:
1. Connect the ultrasound probe you are testing to the probe
adapter. See the list of available adapters under
Accessories.
2. Place the probe you are testing in a saline bath with the
entire critical area of the probe fully immersed.
3. Place the dual electrode (Part No. 2392502 or 2392569) in
the saline bath to a depth of at least one inch.
4. Plug the probe adapter and the electrode wire connectors
into the ULT800. The connections are fully
interchangeable.