Fluke Biomedical ULT800 - Manual (Page 11)

1
Introduction
The ULT800 TEE Transducer Leakage Current Tester measures
the leakage current of ultrasound transducers independent of their
ultrasound systems. Use the hand-held, battery-operated
instrument during the routine transducer cleaning procedure
conducted between patients.
Safety Information
 Warning
To prevent possible electric shock, fire, or personal injury:
• Read all safety Information before you use the Product.
• Use the Product only as specified, or the protection
supplied by the Product can be compromised.
• Remove the batteries if the Product is not used for an
extended period of time, or if stored in temperatures
above 50
° C. If the batteries are not removed, battery
leakage can damage the Product.
• The battery door must be closed and locked before you
operate the Product.
• Replace the batteries when the low battery indicator
shows to prevent incorrect measurements.
• Carefully read all instructions.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
• Do not use and disable the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the
insulation around the terminals.
• Use this Product indoors only.
A Warning identifies conditions and procedures that are dangerous
to the user. A Caution identifies conditions and procedures that
can cause damage to the Product or the equipment under test.