Fluke Biomedical 35080M - Manual (Page 36)

CT Filter Pack Option (33551)
Introduction
6
6-1
Section 6
CT Filter Pack Option (33551)
6.1 Introduction
The CT Filter Pack (33551) provides a non-invasive way to make independent tests of the internal voltage
divider of a CT system -- and a convenient and safe way to check tube voltage.
The actual kV waveform of the CT machine can be displayed on a storage oscilloscope. If the CT
machine is a DC (continuous scan) unit, the proportional voltage can be read on a DMM.
These applications are made possible with the CT Filter Pack (33551) in conjunction with the Model
35080M kVp Divider.
6.2 Specifications
Range
70 to 140 kV
Sensitivity
0.1 V/10 kV
Cal
0.644 V
Zero
60 kV
Cal
124.4 kV
Linearity
Less than 1 kV correction from 70 to 140 kV
Calibration Filtration
2.5 mm Al
Filtration Effect
Less than 1 kV per mm Al difference in filtration (from the 2.5 mm Al calibration standard) over the 70 to 140
kV range
Active Area
40 mm x 6.5 mm
Minimum Anode Current
25 mA at 25 inches