Flowserve URB 2 - Manual (Page 31)

3
Menu Control
– continued –
Control param.
Note
For more information on continuous boiler blowdown, measuring range (conductivity
control), proportional range Xp (conductivity control) and switching hysteresis Hyst
(conductivity control) see chapter Glossary page 42.
Concerning:
■
Conductivity control LRG x-4x and LRR -40
. To set the individual parameters press button
. The activated item is shown in the symbol
bar.
2. To set the desired parameter turn the navigation
wheel and confirm the input by pressing the
navigation wheel. The background of the selected
item is flashing.
3. Turn the navigation wheel until the new value
is reached. Alternatively you can use the button
to increase the value proportionally or use
button to decrease the value.
Press the navigation wheel to confirm the selection. The flashing stops.
4. To obtain more available elements repeat items 2 and 3 and press button
.
Temperature
Note
For more information on temperature compensation (conductivity control), TK
(Linear), TK (Norm), TK (Auto) and cell constant (conductivity control) see chapter
Glossary page 42.
Concerning:
■
Conductivity control LRG x-4x and LRR -40
. To set the individual parameters press button .
The activated item is shown in the symbol bar.
2. To set the desired parameter turn the navigation
wheel and confirm the input by pressing the
navigation wheel. The background of the selected
item is flashing.
3. To enter a new value turn the navigation wheel and
confirm the input by pressing the navigation wheel.
The flashing stops.
4. To obtain more available elements repeat items
2 and 3 and press button .
Device name
Status report Control param. Temperature
µS/cm
0,5 – 6000 µS/cm
Unit:
Range:
6000,0 µS/cm
0000,0 µS/cm
0000,0 µS/cm
MAX:
W:
MIN:
000 %
000 %
Xp:
Hyst:
Device name
Control param. Temperature Blowdown valve
OFF
0,0 %/°C
NaOH+H20 260µS
Stop
000,0 °C
0,000
Compensation
TK [LINEAR]:
TK [NORM]:
TK [AUTO]:
Temperature:
Cell constant:
Device name
Status report Control param. Temperature
µS/cm
0,5 – 6000 µS/cm
Unit:
Range:
6000,0 µS/cm
0000,0 µS/cm
0000,0 µS/cm
MAX:
W:
MIN:
000 %
000 %
Xp:
Hyst:
Device name
Control param. Temperature Blowdown valve
OFF
0,0 %/°C
NaOH+H20 260µS
Stop
000,0 °C
0,000
Compensation
TK [LINEAR]:
TK [NORM]:
TK [AUTO]:
Temperature:
Cell constant: