Flowserve Pulsair III Digital - Manual (Page 13)

24
Worcester Controls Pulsair III Digital Electronic Positioner FCD WCAIM2056-00 - 08/04
fl owserve.com
25
Worcester Controls Pulsair III Digital Electronic Positioner FCD WCAIM2056-00 - 08/04
The menu contents are shown in the fi gures below and the various steps are described
below:
No Full menu selected.
Yes Basic menu selected.
Full menu
no
OK
OK
Full menu
yes
Full Menu can be locked with a passcode, see the SETUP Menu section.
Full Menu: Protection
The Protection menu is used to protect all essential settings.
FULL MENU
PROTECTION
The menu contents are shown in the fi gures below and the various steps are described
below:
No Entered values are not write-protected. “Unprotected” is displayed in the
lower left-hand corner.
Yes Entered values are write protected. Passcode needed for change to No (Ap-
plicable when a passcode has been set up in SETUP menu).
PROTECTION
no
OK
OK
PROTECTION
yes
When changing between Yes and No mode, the OK button must be depressed for three
seconds.
Full Menu: Status
The Status Menu is used to select whether or not the positioner is in service.
FULL MENU
STATUS
The menu contents are shown in the fi gures below and the various texts are described
below:
o o service Not in service. Flashing indicator in upper left-hand corner of display.
in service Positioner in service. Critical parameters cannot be changed.
STATUS
o o service OK
OK
STATUS
in service
When changing between In service and Out of service, the OK button must be depressed
for three seconds.