Dolby Laboratories DP569 - Manual (Page 48)

Model DP569 User’s Manual DolbyRemote
5-8
• Stopped: The user has directed the unit to not encode.
5.6.2 Preprocessing
Figure 5-6 Preprocessing Tab
Input Level Meter shows the input signal used by the dynamic range control process
to determine the amount of boost or cut required.
Line Mode and RF Mode meters show the current value of the dynamic range
control cut and boost words being included in the Dolby Digital bitstream. Red shows
compression (cut) and green shows expansion (boost), calibrated in dB.
5.6.3 Bitstream Info
Figure 5-7 Bitstream Info Tab