Flowserve PMV D3 Digital Positioner - Manual (Page 30)

30
FULL MENU
ALARMS
Deviation Alarm generated when deviation occurs
On/Off Alarm on/off.
Distance Allowed distance before alarm is generated.
Time Total deviation time before alarm is generated.
Alarm out Select ON/OFF offers output on terminals 13 and 14.
Valve act Behaviour of valve when alarm is generated.
Limit 1 Alarm above/below a certain level.
On/Off Alarm on/off.
Minipos Setting of desired min. position.
Maxpos Setting of desired max. position. See diagram below!
Hysteresis Desired hysteresis.
Alarm on Select ON/OFF offers output on terminals 13 and 14.
Valve act Behaviour of valve when alarm is generated.
Limit 2 See Limit 1.
The menu contents are shown in the chart on the next page and the various texts are
described below:
Limit 1, max
Hysteresis
Limit 2, max
Hysteresis
Hysteresis
Limit 2, min
Hysteresis
Limit 1, min
0%
100%
Alarm Limit 1 on
Alarm Limit 2 on
Alarm Limit 1 off
Alarm Limit 2 off
Alarm Limit 2 on
Alarm Limit 1 on
Alarm Limit 1 off
alarm Limit 2 off
Travel
Set alarm and hysteresis values