Flowserve PMV D3 Digital Positioner - Manual (Page 21)

21
BASIC MENU
MAN/AUTO
AUT, OK=MAN
POS= 12,3%
OK
MAN, OK=AUT
POS= 12,3%
The menu contents are shown in the
figures on the right and the various texts are
described below:
AUT, OK = MAN
Positioner in automatic mode
MAN, OK = AUT
Positioner in manual mode
In the MAN mode, the value of POS can
be changed using . The push-
buttons increase/decrease the value in steps.
The value can also be changed in the same
way as for the other parameter values, as
described on page 15.
Other functions
C+ can be fully opened by pressing
and then immediately OK simultaneously.
C- can be fully opened by pressing
and OK simultaneously.
C+ and C- can be fully opened for blowing
clean by pressing
and OK
simultaneously.
When changing between
MAN and AUT mode, the OK
button must be depressed for 3
seconds.
The Man/Auto menu is used to change between manual and automatic modes.