Delta Electronics Program Copy Card TP-PCC - Manual

1
http://www.delta.com.tw/industrialautomation/
TP-PCC
Program Copy Card
Instruction Sheet
1 WARNING
Always read this manual before using the TP-PCC.
TP-PCC doesn’t support plug and play function. Please turn off power before plugging in TP02G or TP04G.
The voltage for TP-PCC is supplied from MPU extension slot. Please confirm TP-PCC plugged direction when
connecting to MPU extension slot to avoid serious damage.
2 INTRODUCTION
Model Explanation
TP PCC -
Series name
Program copy card
Serial Number Explanation
TP-PCC 1 T 3 18 002
Production model
Production series
Production weeks
Production year (2003)
Production factory
Version
T: Taoyuan
3 ELECTRICAL SPECIFICATIONS
Model Name
Item
TP-PCC
Data Reserved Life / Times for Writing In 20 years / one hundred thousand times
Operation Temperature 0 ºC~55ºC
Weight / Dimension 3g / 50.85Ч19.8Ч10 mm
4 PROGRAM COPY CARD FUNCTIONS
Compatible firmware version: TP04G (V1.04 and above) / TP02G (V1.00 and above)
It is used to copy the whole HMI environment settings and application programs to another HMI rapidly. It can save much time
and manpower. The operation is in the following.
PCC: Program Copy Card
TP: TP Series
TP PCC (Copy HMI program to PCC) PCC TP (Copy program in PCC to HMI)
1 Turn the switch on the PCC to TP PCC Turn the switch on the PCC to PCC TP
2 Insert the PCC into the extension slot of TP Insert the PCC into the extension slot of TP
3 Input the power to TP Input the power to TP
4
Please turn off power and then remove when it
displays “remove PCC” on the screen. Please turn off power and then remove when it displays
“remove PCC” on the screen.