Flowserve LNGT - Manual (Page 22)

LNGT USER INSTRUCTIONS ENGLISH 00083107 02-08
Page 22 of 48
®
4.4.3.2 Imperial units
Maximum forces [F] in lbf and moments [M] in lbf•ft – multiply by 1000
Suction Discharge
Type and size
Fx Fy Fz Mx My Mz Fx Fy Fz Mx My Mz
150LNGT375 3.87 4.83 3.11 3.66 1.83 2.71 2.90 3.63 2.34 2.37 1.22 1.83
150LNGT400 3.87 4.83 3.11 3.66 1.83 2.71 2.90 3.63 2.34 2.37 1.22 1.83
150LNGT475 3.87 4.83 3.11 3.66 1.83 2.71 2.90 3.63 2.34 2.37 1.22 1.83
200LNGT300 4.83 6.05 3.90 5.21 2.57 3.93 3.87 4.83 3.11 3.66 1.83 2.71
200LNGT350 4.83 6.05 3.90 5.21 2.57 3.93 3.87 4.83 3.11 3.66 1.83 2.71
200LNGT400 5.81 7.26 4.68 8.46 4.13 6.36 3.87 4.83 3.11 3.66 1.83 2.71
200LNGT425 3.87 4.83 3.11 3.66 1.83 2.71 3.87 4.83 3.11 3.66 1.83 2.71
200LNGT475 4.83 6.05 3.90 5.21 2.57 3.93 3.87 4.83 3.11 3.66 1.83 2.71
200LNGT500 3.87 4.83 3.11 3.66 1.83 2.71 3.87 4.83 3.11 3.66 1.83 2.71
200LNGT550 4.83 6.05 3.90 5.21 2.57 3.93 3.87 4.83 3.11 3.66 1.83 2.71
200LNGT600 3.87 4.84 3.12 3.66 1.83 2.71 3.87 4.83 3.11 3.66 1.83 2.71
250LNGT325 4.83 6.05 3.90 5.21 2.57 3.93 4.83 6.05 3.90 5.21 2.57 3.93
250LNGT425 5.81 7.26 4.68 8.46 4.13 6.36 4.83 6.05 3.90 5.21 2.57 3.93
250LNGT500 5.81 7.26 4.68 8.46 4.13 6.36 4.83 6.05 3.90 5.21 2.57 3.93
250LNGT575 5.81 7.26 4.68 8.46 4.13 6.36 4.83 6.05 3.90 5.21 2.57 3.93
250LNGT625 5.81 7.26 4.68 8.46 4.13 6.36 4.83 6.05 3.90 5.21 2.57 3.93
300LNGT275 6.72 8.47 5.46 8.80 4.33 6.57 5.81 7.26 4.68 8.46 4.13 6.36
300LNGT300 6.72 8.47 5.46 8.80 4.33 6.57 5.81 7.26 4.68 8.46 4.13 6.36
300LNGT400 7.73 9.68 6.24 10.15 5.08 7.51 5.81 7.26 4.68 8.46 4.13 6.36
300LNGT425 7.73 9.68 6.24 10.15 5.08 7.51 5.81 7.26 4.68 8.46 4.13 6.36
300LNGT500 6.72 8.47 5.46 8.80 4.33 6.57 5.81 7.26 4.68 8.46 4.13 6.36
300LNGT725 6.72 8.47 5.46 8.80 4.33 6.57 5.81 7.26 4.68 8.46 4.13 6.36
350LNGT325 7.73 9.68 6.24 10.15 5.08 7.51 6.72 8.47 5.46 8.80 4.33 6.57
350LNGT400 9.68 12.10 7.80 12.73 6.36 9.41 6.72 8.47 5.46 8.80 4.33 6.57
350LNGT450 9.68 12.10 7.80 12.73 6.36 9.41 6.72 8.47 5.46 8.80 4.33 6.57
350LNGT525 9.68 12.10 7.80 12.73 6.36 9.41 6.72 8.47 5.46 8.80 4.33 6.57
350LNGT600 7.73 9.68 6.24 10.15 5.08 7.51 6.72 8.47 5.46 8.80 4.33 6.57
350LNGT675 9.68 12.10 7.80 12.73 6.36 9.41 6.72 8.47 5.46 8.80 4.33 6.57
400LNGT350 9.68 12.10 7.80 12.73 6.36 9.41 7.73 9.68 6.24 10.2 5.08 7.51
400LNGT550 9.68 12.10 7.80 12.73 6.36 9.41 7.73 9.68 6.24 10.2 5.08 7.51
500LNGT375 11.56 14.52 9.34 15.91 7.99 11.8 9.68 12.10 7.80 12.7 6.36 9.41
500LNGT450 11.56 14.52 9.34 15.91 7.99 11.8 9.68 12.10 7.80 12.7 6.36 9.41
500LNGT650 11.56 14.52 9.34 15.91 7.99 11.8 9.68 12.10 7.80 12.7 6.36 9.41
500LNGT800 11.56 14.52 9.34 15.91 7.99 11.8 9.68 12.10 7.80 12.7 6.36 9.41
600LNGT875 15.46 19.35 12.47 21.66 10.8 16.1 11.56 14.52 9.34 15.9 7.99 11.8
600LNGT1150 19.35 24.19 15.59 27.08 13.5 20.0 11.56 14.52 9.34 15.9 7.99 11.8
700LNGT700 19.35 24.19 15.59 27.08 13.5 20.0 13.44 16.93 10.91 19.1 9.54 14.2
900LNGT650 19.35 24.19 15.59 27.08 13.5 20.0 17.34 21.77 13.98 23.8 11.9 17.6
900LNGT1050 23.11 29.03 18.68 32.49 16.2 24.1 17.34 21.77 13.98 23.8 11.9 17.6
1000LNGT750 19.35 24.19 15.59 27.08 13.5 20.0 19.35 24.19 15.59 27.1 13.5 20.0
4.4.3.2 N
otes
1. F= External force, tensile or compression.
M= External moment, CW or CCW
2. Forces and Moments may be applied simultaneously in any direction.
3. Values apply to all materials.
4. Higher loads may be acceptable,if direction and magnitude of individual loads are known: approval needed.
5. Pumps must be on rigid foundations and baseplates.
6. Pump/Baseplate should not be used as pipe anchor. Expansion joints must be properly tied.
7. Specified pump foot bolt torque must be used. Bolt Yield Strength > 300 N/mm² [>43000 psi]
8. Sign Convention follows API 610 10th Edition / ISO 13709 and ISO 1503