Flowserve APKD User Manual
Page 11
APKD DOUBLE-CASE, DOUBLE-SUCTION USER INSTRUCTIONS 26999903 07-13
Page 11 of 55
flowserve.com
2.3.4
Lifting of fully assembled pumps
If the pump is fully assembled, it has to be adequately strapped and supported at least two places before it can
be lifted from the shipping crate and moved to the installation site. See details shown. Same rules are
applicable when the pump is pulled out from the sump and moved to another location.
Figure 2.5
Examples shown here are for illustration only. See section 2.3 1 for specific lifting instructions
based on design variations. The pumps vary in weight, length and physical appearances from the types shown
here. Therefore, before lifting is attempted, exercise caution to prevent any injuries or loss of life.
Figure 2.6
- CESM-4 (28 pages)
- CESM-1 (32 pages)
- ATEX N (20 pages)
- CESM-2 (32 pages)
- PVML (29 pages)
- WDX (46 pages)
- WX Worthington (51 pages)
- WX Worthington (52 pages)
- WMA2 (35 pages)
- Type RX (56 pages)
- LCH (40 pages)
- NM (48 pages)
- MJ Slurry (42 pages)
- Mark 3 (48 pages)
- MN (49 pages)
- MF (50 pages)
- CPXVC (32 pages)
- M Slurry (60 pages)
- PolyChem GRP (52 pages)
- CPXV fitted with FRBH hydraulics (44 pages)
- Durco Mark 3 ISO Frame Mounted (52 pages)
- MP1 Sier-Bath (48 pages)
- Twin Screw Rotary (56 pages)
- LNNC (56 pages)
- IDP CPXRV (48 pages)
- HWX Worthington (40 pages)
- U-MAG INNOMAG (40 pages)
- N-Series Worthington (20 pages)
- TB-MAG INNOMAG (44 pages)
- HDX IDP (64 pages)
- QLQC Vertical Worthington (61 pages)
- LPNV Worthington (48 pages)
- Mark 3 ISO Durco (32 pages)
- MEN-TI (36 pages)
- MEN (36 pages)
- FP (40 pages)
- FP (40 pages)
- FM (36 pages)
- MENBLOC 60Hz (36 pages)
- ME (36 pages)
- PVXM (31 pages)
- VTP (76 pages)
- PLEUGER (40 pages)
- WJE IDP (28 pages)