English – Denon DVD-5900 User Manual
Page 50
50
ENGLISH
6
When Gamma Correction by Numerical Input Has
Been Selected and Adjusted: (Press the cursor
button (ª))
• All of the adjusted contents are stored.
• The brightness level can be adjusted in a range of
16 to 235.
• Pressing the cursor button (•) raises the level (and
the image becomes brighter), and pressing the
cursor button (ª) lowers the level (and the image
becomes darker).
• A press of the CLEAR button returns all of the
setting points to the standard level.
The level of the selected point cannot exceed the
level of the points above and below that point. (A
dark portion cannot be set to exceed a portion that
is brighter than it.)
Ending the Image Quality Adjustment
Press the PIC.ADJ button again.
When Gamma Correction by Gamma Correction
Graph Input Has Been Selected and Adjusted.
5
When Noise Reduction (Adjustment 3) Is Selected
and Adjusted:
3DNR (0 to +7) (Factory default: 0)
• This reduces the noise of the overall image.
BLNR (0 to +8) (Factory default: 0)
• This reduces the block noise of the image.
MQNR (0 to +8) (Factory default: 0)
• This reduces the mosquito noise of the image.
CCS (0 to +3) (Factory default: 0)
• This performs removal of the color signal
component for images in which the color signal
component is mixed with the brightness signal.
(Only effective with progressive images.)
MEMORY 1
0
0
100
235
GO : 0 2 4
MEMORY 1
1
2
3
-6
-6
-6
-6
Remote control unit
Remote control unit
ENTER
MEMORY 1
1
2
3
24
32
48
80
96
128
160
192
64
G0
G1
G2
G4
G5
G6
G7
G8
224
G9
G3
Remote control unit
Remote control unit
ENTER
When Gamma Correction by Numerical Input Has
Been Selected and Adjusted: (Press the enter
button)
• All of the adjusted contents are stored.
• The brightness level can be adjusted in a range of
16 to 235.
• Pressing the cursor button (•) raises the level (and
the image becomes brighter), and pressing the
cursor button (ª) lowers the level (and the image
becomes darker).
• A press of the CLEAR button returns all of the
setting points to the standard level.
The level of the selected point cannot exceed the
level of the points above and below that point. (A
dark portion cannot be set to exceed a portion that
is brighter than it.)
Ending the Image Quality Adjustment
Press the PIC.ADJ button again.
When Gamma Correction by Gamma Correction
Graph Input Has Been Selected and Adjusted.