Denon DVD-5900 - Manual (Page 16)

PHONES DIRECT STEREO
ANALOG EXT. IN
DOLBY SURROUND DTS SURROUND WIDE SCREEN
CINEMA / MUSIC 6.1 / 7.1 SURROUND VIDEO ON / OFF
STATUS
M-ZONE 1
FUNCTION CONTROL
INPUT
MODE
5CH / 7CH STEREO DSP SIMULATION
TONE DEFEAT
MODE SELECT
REC / M-ZONE 2
SURROUND MODE
INPUT REC SELECT / M-ZONE
MULTI FUNCTION
DVD-5900
Front speaker (left)
Surround speaker (left)
Center speaker
AV amplifier with Denon Link input
terminals
Front speaker (right)
Subwoofer
Surround speaker (right)
To power outlet
DENON LINK
16
ENGLISH
High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold Denon Link compatible
AV amplifier.
(7) Denon Link connections
2 DENON LINK Second Edition:
• With the DENON LINK, Second Edition (2nd), the audio signals are transferred from the DVD player to the AV amplifier in digital
form, with the same quality as the signals recorded on the disc.
Digital transfer of the high quality multi-channel signals of DVD audio is possible for all discs. (A Second Edition compatible DVD
player and AV amplifier are required for this.)
2 Compatibility with previous models:
• With Second Edition, the format of the signals handled differs from that of the previous version of DENON LINK.
Thus, digital audio signals output from a DENON LINK S.E. (2nd) compatible DVD player can only be played on a DENON LINK
S.E. (2nd) compatible AV amplifier (Playback with DENON LINK connections is not possible when using a DENON LINK S.E.
compatible DVD player in combination with an AV amplifier that is not S.E. compatible.).
• If the DENON LINK connector on your AV amplifier is not S.E. compatible, please consult your authorized DENON dealer.
• “S.E.” is indicated on the rear panel’s DENON LINK connector on DENON LINK S.E. compatible products.
2 DENON LINK S.E. settings:
• At “AUDIO SETUP” under “Default Settings”, set “DENON LINK” to “2nd”. (See pages 33 to 37.)
• (If you connect the DENON LINK, set to “2nd”.)