Denon DVD-5900 - Manual (Page 48)

48
ENGLISH
2
B When “DVI SETUP” is selected:
Turning the select knob will display the following setting modes
on the display.
DVI OFF: (Factory default)
No output the signals from DVI-D connector.
480P:
Outputs the image from the DVI-D connector at 480P.
720P:
Outputs the image from the DVI-D connector at 720P.
1080i:
Outputs the image from the DVI-D connector at 1080i.
Select the item that you wish to set and press the select knob to
define it.
B When “DVI BK (Black) LEVEL” is selected:
Turning the select knob will display the following setting modes
on the display.
NORMAL: (Factory default)
Signals are output from the DVI-D terminal with a digital RGB
video level (data range) of 16 (black) to 235 (white).
ENHANCED:
Signals are output from the DVI-D terminal with a digital RGB
video level (data range) of 0 (black) to 246 (white).
✽ When the DVI-D terminal is connected, the black may seem to
stand out, depending on the TV or Monitor you are using. In this
case, set this to “ENHANCED”.
Select the item that you wish to set and press the select knob to
define it.
(Exit the setting mode automatically.)
480P
720P
1080i
DVI OFF
11 ADJUSTING THE PICTURE QUALITY
1
ENTER
0 +10
TOP MENU DISPLAY
MARKER RANDOM
PAGE
A-B
ZOOM
DIMMER PIC.ADJ
REPEAT
SETUP
SKIP SLOW / SEARCH
ANGLE SUBTITLE AUDIO SEARCH MODE
PLAY
STILL / PAUSE STOP
T. MENU DISP.
MENU
1
2, 3, 4, 5, 7, 8
2, 6, 9
P I C T UR E MODE
S TD M 1 M 2 M 3 M 4 M 5 SET
Press the PIC.ADJ button during playback or during
pause.
• The image quality adjustment screen will appear.
STD
Returns the settings to the factory default
settings.
M1 TO M5
Image quality settings that have been adjusted to
your preference can be stored to 5 memories, M1
to M5.
SET
SET permits set to setup level and setting of the
screen display position (horizontal and vertical).
PIC.ADJ
Remote control unit
NORMAL
VID EO O F F
D IGI TAL O F F
AL L OF F
B When “PURE DIRECT” is selected:
Turning the select knob will display the following setting modes
on the display.
NORMAL: (Factory default)
All signals out. (Stop the direct mode)
VIDEO OFF:
Video signals are not output.
DIGITAL OFF:
Digital signals are not output.
ALL OFF:
No indicate in Display of the main unit, and video and digital
signals are not output. (except analog audio output)
Select the item that you wish to set and press the select knob to
define it.
(Exit the setting mode automatically.)
Main unit
SELECT
PUSH ENTER
Main unit
SELECT
PUSH ENTER
NORMAL
ENHA N CE D
Main unit
SELECT
PUSH ENTER