Denon DVD-5900 - Manual (Page 49)

49
ENGLISH
3
When Image Quality Adjustment 1 Is Selected and
Adjusted:
• Press cursor button (ª), then select the image
quality adjustment item with cursor buttons ( 0 ,
1 ), set the adjustment value with cursor buttons
(•, ª), and press the ENTER button.
• All of the adjusted contents will be stored.
CONTRAST (–6 to +6) (Factory default: 0)
• This adjusts the light/dark difference of the image.
BRIGHTNESS (0 to +12) (Factory default: 0)
• This adjusts the brightness of the image.
SHARPNESS (MID) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the
intermediate frequencies.
SHARPNESS (High) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the
high frequencies. (Only effective for progressive
images.)
HUE (–6 to +6) (Factory default: 0)
• This adjusts the balance between green and red.
(Not effective for progressive scan output nor
component output.)
ENHANCER (0 to +7) (Factory default: 0)
This emphasizes the contour of the image.
Remote control unit
ENTER
Remote control unit
MEMORY 1 1 2 3
0 0 0 0 0
M H
0
MEMORY 1 1 2 3
0 -2 -6 -6
4
When Image Quality Adjustment 2 Is Selected and
Adjusted:
BLACK LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the black level.
WHITE LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the white level.
CHROMA LEVEL (–6 to +6) (Factory default: 0)
• This adjusts the density of the color.
CHROMA DELAY (–2 to +2) (Factory default: 0)
• This adjusts the shift of the brightness signal and
the color signal of the image. (Only effective for
progressive images.)
ENTER
Remote control unit
Remote control unit
Select the memory using the 2 cursor buttons ( 0 ,
1 ) and press the ENTER button.
IMAGE QUALITY ADJUSTMENT 1
This permits adjustment of the contrast,
brightness, sharpness, tint, and enhancer. /
Advance to Operation 3.
IMAGE QUALITY ADJUSTMENT 2
This permits adjustment of the setup level, black
level, white level, color density, chroma delay, and
fresh color. / Advance to Operation 4.
NOISE REDUCTION (ADJUSTMENT 3)
The following types of noise reduction can be
adjusted: 3D NR (3D noise reduction), BLNR
(block noise reduction), MQNR (mosquito noise
reduction), and CCS (cross color suppression). /
Advance to Operation 5.
GAMMA CORRECTION
This is selected when dark portions of the image
are obscure, or bright portions are much brighter
than necessary. / Advance to Operation 6.
ENTER
Remote control unit
Remote control unit
MEMORY 1 1 2 3
0 0 0
M H
0 0 0
2