ETA Centrino s doplňkovým příslušenstvím - Manual (Page 42)

– The preparation (processing) times depend on the amount, the kind and the quality
of used citrus fruits, but as a standard they are in tens of seconds (about 30 to 180
seconds).
Blender - blending bowl (E), (Fig. 10)
Mounting and removal
Remove and mount the assembled bowl only when turning regulator A1 is in the OFF
position.
Mount the bowl on drive A7 so that it slides down, then secure it by turning it clockwise till
you hear a snapping sound (at the same time, safety lock A6 is unlocked). Pay special
attention to this operation. Cover the blending bowl with lid E2 and lid plug E3. You can
remove the bowl in the opposite direction. When mounting or removing the container, do
not apply much pressure on the container handle.
Use
The blender is intended for mixing and blending juices, milk shakes, soups, sauces,
mayonnaise, children‘s and diet meals, for puffy dough, sponge-cake dough, making purée
etc.
Blending: regulation disc A1 or button A2 (PULSE) used. Setting regulator MAX.
Recommendation
- If you process more food, divide it into individual portions to prevent overloading of the
drive unit.
- It is recommended to cut tough ingredients into small pieces. do not process very hard
materials (e.g. ice cubes, etc.). The knife would be blunt soon.
- Hard ingredients (e.g. legumes, soya beans, etc.) should be soaked in water before
processing.
- Never remove lid E3 when the drive unit is in operation.
- liquid ingredients (e.g. oil, milk) or other ingredients can be added to the bowl only after
removing plug E4 through the small hole in the lid (when the motor is in operation). We
recommend leaving the plug inserted in the lid during operation so that liquid ingredients
do not splash out through the filling hole.
- The longer you process food in the blender, the smoother the result will be.
- You can also process hot liquids up to the temperature of 80 °C, e.g. sauces, soups.
- In the case of liquids that create foam (e.g. milk) never fill the container up to the „MAX“
gauge mark to prevent overflowing. In this case we recommend the amount of about
0.5 l.
- If you are not satisfied with the result, switch off the appliance, mix the ingredients with
a spatula, take some part of the ingredients or add a little liquid.
- The preparation (processing) times depend on the amount, the kind and the quality of
used ingredients, but as a standard they are in tens of seconds.
After mounting of the assembled blending bowl on the drive unit and after its filling with
ingredients, switch on the appliance by turning regulator A1 from the OFF position (the
appliance is off) to the ON position (the appliance is on) (backlight of buttons A2 and A3
will start flashing). Start by turning the regulator to the required speed level or by pushing
button A2 or A3. When you have finished, switch off the appliance by turning the regulator
to the OFF position (the appliance is OFF), then unplug power cord A8 from the electric
socket.
42
GB
/ 117