ESI NeON - Manual (Page 8)

ESI
8
You can verify correct connection when the LED of NeON lights up. Power is supplied through the USB
cable.
Series A Plug connectors are used for those devices with a permanently attached external cable, like a
Mouse, Keyboard, USB hub etc.
Series B Plug connectors are used for devices that require detachable external cables like Printers,
Scanners, Modems, and Standalone Hubs.
3) Using External Power Supply
We recommend a 9V 500mA DC out adaptor. Just plug in the power supply to the socket labeled DC 9V
500mA and switch the power on. Other adaptors with 9V DC out specification can be used if they are
rated at greater than 500mA output.
NOTE : Do not leave the adapter plugged in for extended periods if the unit is not in use.
4) System Requirements
NeON does not depend on CPU resources but your computer specifications are important to make full
use of NeON’s professional digital audio/MIDI features.
IMPORTANT: If power is only supplied through the USB cable, it is highly recommended that you use at least a
300W power supply. If you use the NeON with a laptop, we recommend that you use the included external power
supply.
Minimum system requirements (PC)
z Intel Pentium IV 1.7 GHz CPU or equivalent AMD CPU
z 256MB of RAM
z Direct X 8.1 or higher
z Microsoft Windows®XP SP1, SP2
z One available USB port
Minimum system requirements (Mac)
z Macintosh with G4 or better processor
z 256MB of RAM
z Mac OS 10.2 or higher
z One available USB port