ESI NeON - Manual (Page 7)

ESI
7
4. Installation
1) Unpacking your NeON
Your NeON carton should contain the following;
z NeON Keyboard
z Operation Manual
z USB Cable
z Installation CD & Tracktion CD
If any of the above listed items are missing, please contact the retailer you purchased the product from.
You might want to keep the NeON carton and packing materials for easy shipping or transport.
2) Before you connect your NeON Keyboard
You are probably eager to plug in your keyboard and get started, but before you begin, please read your
computer’s manual on installing USB devices.
There is no need to shut down the computer to install USB devices.
1. Find the USB port on your computer. USB ports are usually located by the PS/2 or serial ports in the back.
USB port on computer
2. Plug in the appropriate end of a USB cable (called Series A plug) to the USB port of your computer.
Notice that USB ports of your computer and NeON’s USB port are different.
Series A plug
3. Connect the other end of the USB cable (Series B plug) to the USB port of NeON .
Series B plug