ESI NeON User Manual

Page 13

ESI

2) Level Faders

You can move both faders at the same time, click the space between faders and move.

1. Input

Adjust input monitoring level of NeON. You can select input type between MIC/HI‐Z and LINE IN with

button. Active Input shows like this.

Set the level using the mouse, mouse wheel, or

cursor keys. The number on the bottom indicates the relative level in dB.

2. Output

Adjust output level of NeON. There are two kinds of outputs – WDM OUT and H.P OUT(Headphone

Out). WDM OUT is the same that Windows wave out. In case of H.P OUT, the number on the bottom

indicates the relative level in dB. That’s why it indicates the level in %. Set the level using the mouse,

mouse wheel, or cursor keys.

(Monitor) Button

If this button is on, you can hear the sound source through “line in” jack in real time.

(Mute) Button

Select mute button to mute each source.

Button

If this button is turned on, you can get +20dB gain for MIC/Hi‐Z input.