Controlling the amulet using ir, Controlling your television and other a/v devices – Entone Amulet 300 (F1) User Manual
Page 24
Amulet High Definition IP Television Receiver User’s Guide
Copyright
2010 Entone, Inc. All rights reserved
.
22
CONTROLLING THE AMULET USING IR
Amulet uses InfraRed (IR) to receive remote control signals. IR signals travel only short distances (40 feet
or less), and cannot go through walls or other solid objects. You must point the remote control to the
Amulet, with no objects blocking the line of sight.
Figure 8-2 IR Reception Range
CONTROLLING YOUR TELEVISION AND OTHER A/V DEVICES
The Amulet remote controls can also be used to control TVs and other A/V devices such as DVD players
and recorders. The remote controls use infrared (IR) light signals to control other devices that the remote is
programmed to control. IR signals travel only short distances (40 feet or less), and cannot go through walls
or other solid objects. You must point the remote control directly at these devices, with no objects blocking
the line of sight.
For details of how to program the Amulet remote controls and the supported devices, please refer to the
Amulet Quick Reference Guide or
URC 4 User’s Guide.