Entone Amulet 300 (F1) - Manual (Page 11)

Amulet High Definition IP Television Receiver User’s Guide
Copyright  2010 Entone, Inc. All rights reserved . 9
FRONT PANEL AND REAR PANEL
Figure 2-1 Amulet Front Panel
Part Name Description
1. POWER If held for less than 5 seconds, turns the Amulet HD TV receiver ON/OFF. Lights blue
when the receiver is turned on.
If held for longer than 5 seconds, the Amulet HD TV receiver will be restarted.
2. USB USB connector
3. LINK Indicator Green when Ethernet connection is active
4. HD Indicator Blue when the output resolution is HD (720p or higher)
5. RECORD Indicator Red when PVR (Personal Video Recording) is recording
6. MENU Display the User Menu
7. Arrow Keys and OK
Button OK Button for triggering remote registration mode
Other usage according to middleware
Figure 2-2 Amulet Rear Panel
Part Name Description
1. ANTENNA Connector for wireless antenna (optional)
2. SATA Connector for connecting external eSATA harddisk drive
3. CH4/CH3 Switch Switch for toggling the RF TV default channel (either channel 3 or channel 4)
4. REMOTE CONTROL RF Type-F connector for connecting the RF remote control antenna (optional)
5. COAX RF Type-F connector for decoder
6. VIDEO Y Component Video output (Y)
7. VIDEO Composite video
8. VIDEO P
B
Component Video output (P
B
)
9. AUDIO LEFT Composite audio output (channel left)
10. VIDEO P
R
Component Video output (P
R
)
11. AUDIO RIGHT Composite audio output (channel right)