Connecting tv using rca composite or s-video – Entone Amulet 300 (F1) User Manual

Page 17

Amulet High Definition IP Television Receiver User’s Guide

Copyright



CONNECTING TV USING RCA COMPOSITE OR S-VIDEO

1. Acquire the required cable. RCA cable comes packaged with the Amulet. S-Video cable is not

packaged with the Amulet. Before purchasing the cable, consult your TV owner‘s manual to confirm
that your TV supports the video signal output that you plan to use.

2. Connect the video and audio cables to the Amulet.
3. Connect the opposite end of the video and audio cables to the matching input in the TV.
4. Plug in your TV and turn on the power using your TV remote control. Use your TV remote control to

select the respective video input that has con

nected to the Amulet. Consult your TV owner‘s manual for

instructions as required.

5. Plug in your Amulet and turn on the power.
6. You should now see the output from the Amulet on your TV screen.

Figure 4-7 Connecting TV using RCA Composite Video/Audio

Figure 4-8 Connecting Primary TV using S-Video and Composite
Audio