Eizo DuraVision FDX1501 / FDX1501T 取扱説明書 - Manual (Page 21)

8
*1 DC power terminal block
Connector Pin Assignment Power sequencing
1 2 3
Pin No. Signal
1 DC12V
2 DET *
3 Ground
* Not connected
t1
10V
t1 < 50ms
10V
5V
t2 30ms < t2
DC12V
*2 Button extension connector: S3B-PH-SM4-TB(LF)(SN) (JST)
Connector Pin Assignment
Pin No. Signal
1 KEY0
2 KEY1
3 Ground
●
How to assemble
Attention
• Since the panel mounted on the monitor is tightened with a metal panel fitting screw, please make the
selection considering the following points.
- Flat
- A thickness of 5 mm
- A structure having the strength to support fixing with the screw.
1. Insert the monitor into the mount opening of the panel from the front.
The dimensions of a fitting opening are the “Panel opening dimensions” shown in the exterior view.
Mount opening (Panel opening dimensions):
341±0.5mm × 289±0.5mm