Denon DMV-3700 - Manual (Page 61)

61
ENGLISH
TROUBLESHOOTING 18
Check again before assuming the player is malfunctioning.
2 Are all the connections correct?
2 Are you following the instructions in the manual?
2 Are the amplifier and speakers operating properly?
If the DVM-3700 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVM-3700 may be
damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest DENON sales office.
Symptom
Power does not turn on.
Playback does not start when PLAY button
is pressed.
Playback stops immediately.
Picture does not appear.
Sound is not produced or sound quality is
poor.
Menu playback of video CD’s is not
possible.
Picture is disturbed during the search
operation.
Buttons do not operate.
No subtitles are displayed.
Audio (or subtitle) language does not switch.
Angle does not switch.
Playback does not start when the title is
selected.
You have forgotten the password you have
set for the “Ratings” setting.
The disc is not played with the audio or
subtitle language set as the default setting.
Picture is not displayed in 4:3 (or 16:9).
No messages appear on the screen when
buttons are operated.
Menu screen messages for the desired
language do not display.
Remote control unit does not operate.
Check Page
• Plug the power cord securely into the power outlet.
• Is there condensation on the disc or player? (Let stand for 1 or 2 hours.)
• Discs other than DVDs, video CDs and music CDs cannot be played.
• Disc is dirty. Wipe off the dirt.
• Check the connections.
• Set the TV’s input to “video”.
• Check the connections.
• Properly set the input of the TV, stereo, etc.
• Menu playback is not possible with anything but video CDs with playback control.
• Some disturbance is normal.
• Some operations are disabled for some discs.
• Subtitles are not displayed for DVDs not containing subtitles.
• Subtitles are turned off. Turn the subtitles setting on.
• The audio (or subtitle) language does not switch for discs which do not include multiple audio (or
subtitle) languages.
• For some discs the audio (or subtitle) language cannot be switched when the operation to switch it is
performed, but can be switched on the menu screens.
• The angle cannot be switched for DVDs which do not contain multiple angles. In some cases
multiple angles are only recorded for specific scenes.
• Check the “Ratings” setting.
• Use the procedure described below to reset all the settings to the factory defaults.
In the stop mode, press and hold in the PLAY, SKIP ( 8 ) and OPEN/CLOSE buttons on the DVD
player for at least 3 seconds. (Check that “Initialized” has turned off from the TV screen.)
• The disc does not play with the selected audio or subtitle language if that audio or subtitle language
is not included on that DVD.
• Set the “TV Aspect” default setting to the proper setting for the connected TV.
• Set the “On-Screen Messages” default setting to “On”.
• Check the default setting for the disc language’s menu language.
• Check that the batteries are inserted in the proper “ < ” and “ > ” directions.
• The batteries are dead. Replace them with new batteries.
• Point the remote control unit at the remote control sensor when operating it.
• Operate the remote control unit within a distance of 7 meters from the remote control sensor.
• Remove the obstacle between the remote control unit and remote control sensor.
10
—
8
9
10
—
10
—
21
—
22
—
39
—
37, 39
40
46~48
—
45
53
50
45
17
17
17
17
17