Denon DMV-3700 - Manual (Page 11)

ENGLISH
11
(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
1
2
S-VIDEO OUT COMPONENT
VIDEO OUT VIDEO OUT ANALOG OUT DIGITAL OUT
(PCM/BITSTREAM)
REMOTE
CONTROL
CONTROL
1 2 Cr Cb Y L IN OUT OUT COAXIAL OPTICAL R
COMPONENT VIDEO IN
Y Cb Cr
AUDIO IN
L
R
NOTE:
• Use three commercially available 75 Ω/ohm pin-plug cord to connect the DVM-3700’s color component output connectors to the TV or
monitor.
Color component output connectors (Cr, Cb and Y)
The red (Cr), blue (Cb) and brightness (Y) signals are output independently, achieving more faithful reproduction of
the colors.
• The color component input connectors may be marked differently on some TVs or monitors (Pr, Pb and Y/R-Y, B-
Y and Y/Cr, Cb and Y, etc.). For details, refer to the TV’s operating instructions.
DVM-3700
To power outlet
• Connect the DVM-3700’s video outputs to the TV either directly or
through an AV amplifier. Do not connect it via a VCR (video
cassette recorder).
NOTES:
• Some discs contain copy prohibit signals. If such discs are played
via a VCR, the copy prohibit system may cause disturbance in the
picture.
TV