DR Power 3-Point Hitch Rapid-Feed - Manual (Page 6)

2 3-POINT HITCH DR ® RAPID-FEED™ CHIPPER
Specifications
MECHANICAL SPECIFICATIONS
Tractor Horsepower Category 1 – 65 HP Max.
Drive Tractor PTO
PTO Speed 540 RPM
PTO Shaft Extension Sheave 14" – 3 Groove 3V
Chipping Capacity 4-1/2"
Rotor Speed 2,071 RPM
Rotor Pulley 3.65" DIA., 3 Groove 3V
Number of Chipper Knives 1
Chipper Knife Size 6-1/4" X 2" X 3/8"
Chipper Knife Material Heat Treated Tool Steel
Adjustable Knife Wear Plate Yes
Chipper Flywheel 16-1/2" DIA., 3/4" THK
Flywheel Weight 55 LBS.
Chipper Housing Material 7 GA Steel
Hopper Material 14 GA Steel
Belt 3V-3 Groove X 60"
Belt Adjustment Spring Loaded Idler Pulley
Hopper Opening at Top 22-1/2" X 29"
Chipper Weight w/PTO Shaft 295 lbs.
SHIPPING SPECIFICATIONS
Shipping Dimensions 54" L x 46" W x 46" H
Shipping Weight 382 lbs
Serial Number
A Serial Number is used to identify your machine. The number is located on the Serial Number Label on
your machine. For your convenience and ready reference, enter the Serial Number in the space provided
on the front cover of this manual.
Order Number
An Order Number is used to check and maintain your order history. The number is located on the
upper left portion of your packing slip. For your convenience and ready reference, enter the Order
Number in the space provided on the front cover of this manual.