DR Power 3-Point Hitch Rapid-Feed User Manual

Page 17

Plastic
Banding

Figure 5

1. Cut the Plastic Banding that is securing the Parts Box,

PTO Shaft Assembly and any Accessories that may be
strapped to the Crate (Figure 5).

2. Remove the Parts Box, PTO Shaft Assembly and any

accessories (if ordered).

3. Pry off the two bottom side boards that connect the

Crate top to the Pallet (Figure 6).

4. With help from another person, lift the Crate Top from

the Pallet.

5. Remove the four Lag Bolts that secure the Chipper

Support Legs to the Pallet (Figure 7).

6. With the help of another person, carefully slide the

Chipper from the shipping pallet, resting it on the
Support Legs.

Bottom
Side
Boards

Figure 6

Lag Bolts

Figure 7

Chipper
Support
Leg

Pallet

• WEAR EYE PROTECTION WHEN REMOVING THE CRATE

TOP TO PROTECT YOUR EYES FROM FLYING DEBRIS.

• STABILIZE THE SHIPPING CONTAINER ON CLEAN FLAT

TERRAIN BEFORE ATTEMPTING TO UNPACK AND
ASSEMBLE THE CHIPPER.

• FOR YOUR SAFETY WE RECOMMEND YOU HAVE TWO

PEOPLE FOR THE FOLLOWING PROCEDURES.