DR Power Hydraulic 22-Ton - Manual (Page 16)

16 DR ® 22-TON VERTICAL/HORIZONTAL WOOD SPLITTER
7. Attach the base unit and the rail assembly together by
installing the hinge pin and hairpin clip (Figure 10).
8. Only hand tighten the nuts as you bolt the rail rest to
the rail assembly using two 1/2-13 x 1-1/2 inch long
hex head bolts, lock Washers, and nuts (Figure 11).
9. Pull the locking lever outward and rotate the handle to
hold the lock pin in the unlocked position.
10. Block the wheels to prevent the base unit from
moving. Carefully lower the rail assembly to horizontal
position (Figure 12). Securely tighten the nuts holding
the base unit to the rail assembly (Step 5) and the nuts
holding the rail rest assembly (Step 8).
Figure 12
Rail
Assembly
Figure 11
Rail
Rest
Locking Lever
Bolts (far side),
Lockwashers and Nuts
Unlock
Figure 10
Hinge
Bracket
Hairpin
Clip
Hinge
Pin
Rail
Assembly
Base
Unit