DR Power Hydraulic 22-Ton - Manual (Page 12)

12 DR ® 22-TON VERTICAL/HORIZONTAL WOOD SPLITTER
Tools needed:
• Hammer and pry bar
• Utility knife
• 10" crescent wrench
• Ratchet
• 1/2" open end wrench
• 1/2" socket
• 3/4" open end wrench
• 3/4" socket
• Funnel
• Pliers
• Band Cutters
Supplies needed:
• Pipe sealant tape
• Hydraulic fluid (see “specifications”, page 3)
• Engine oil (see engine manual)
• General purpose grease
Shipping List
The following chart contains the list of parts that should be shipped as part of the
DR 22-TON VERTICAL/HORIZONTAL WOOD SPLITTER.
D ESCRIPTION Q TY D ESCRIPTION Q TY
Base Unit (engine) 1 1 Rail Latch Assembly
Rail Unit (hydraulic cylinder) 1 1 Rail Latch Assembly 1 1
Hydraulic Fluid Filter 2 1 Bolts (1/2-13 x 1-1/2 inch) 2 2
Hitch Assembly Parts Lock Washers (1/2 inch) 2 2
Hitch Assembly (2 inch) 2 1 Nuts (1/2-13) 2 2
Bolt (1/2-13 x 3-1/2 inch) 2 2 Valve Assembly
Locknuts (1/2-13) 2 2 Control Lever (valve) 2 1
Safety Chains 2 2 Knob (valve lever) 2 1
Safety Link 2 1 Valve Link 2 1
Tongue and Front Leg Assembly Clevis Pins 2 3
Tongue and Front Leg Weldment 1 1 Cotter Pins 2 3
Bolts (1/2-13 x 3-1/2 inch) 2 2 Fender Assembly
Lock Washers (1/2 inch) 2 2 Fenders 2 2
Nuts (1/2-13) 2 2 Bolts (5/16-18 x 3/4 inch) 2 4
Rail to Base Assembly Locknuts (5/16-18) 2 4
Bolts (1/2-13 x 1-1/2 inch) 2 2
Lock Washers (1/2 inch) 2 2
Nuts (1/2-13) 2 2
1
On the pallet.
2
In cardboard box.