Unpacking the machine, Opening the shipping carton – DR Power Walk-Behind 6.5 (Pre-August 2010) User Manual
Page 17

CALL
TOLL-FREE
1-800-DR-OWNER 13
Unpacking the Machine
Your
DR WALK-BEHIND LEAF & LAWN VACUUM
shipped in one carton, completely assembled.
Items Supplied in Shipping Carton:
•
DR WALK-BEHIND LEAF & LAWN VACUUM
•
Safety
&
Operating Instructions Manual
•
Briggs and Stratton Engine Manual
Opening the Shipping Carton
Tool Needed:
•
Pliers
•
Box Cutter
STABILIZE THE SHIPPING CONTAINER ON A FLAT SURFACE BEFORE ATTEMPTING TO UNPACK THE
MACHINE.
1. Using Pliers, carefully remove the staples from the top of
the shipping carton and open the top (Figure 2). Be careful
of the staples; they are sharp.
2. Remove the Protective Packing Material (Figure 2).
3. Remove any accessories and the corrugated divider from
the center of the carton (Figure 3).
4. Cut the cardboard top to bottom in the seams at the front
of the carton and fold it down (Figure 4).
5. Grasp the Control Handle and roll the machine from the
shipping carton (Figure 5).
6. Do not discard your packaging material until you are fully
satisfied with your new DR WALK-BEHIND LEAF & LAWN
VACUUM.
Figure 3
Figure 2
Figure 4
Figure 5
Protective
Packing
Material