DNF Controls ST200-S-TBL - Manual (Page 9)

9 ST200-S
GPI CONNECTOR
15-Pin, Female, (DB15F) Version 6 Hardware
PIN FUNCTION
NOTE
1 +5v DC
2 SHIFT Switch Active Low
3 Record Tally Active Low, Open-Collector
4 Play Tally Active Low, Open-Collector
5 Stop/Still Tally Active Low, Open-Collector
6 Rewind/ Reverse Tally Active Low, Open-Collector
7 Fast Forward/ Forward Tally Active Low, Open-Collector
8 Jog Tally Active Low, Open-Collector
9 Command Common
10 Record Command Active Low
11 Play Command Active Low
12 Stop Command Active Low
13 Rewind Command Active Low
14 Fast Forward Command Active Low
15 Jog/Shuttle Select Command Active Low
NOTE: There are no internal current limiting resistors for the open-collector Tally Outputs.
Limit each Tally Output current to 40ma.
GPI CONNECTOR
26-Pin D-Type, Female (DB26F) Version 7 Hardware ONLY
Pin #
1 GPI 1 Out Record tally out (Open collector)
2 GPI 2 Out Play tally out (Open collector)
3 GPI 3 Out Stop tally out (Open collector)
4 GPI 4 Out Rewind tally out (Open collector)
5 GPI 5 Out Rewind tally out (Open collector)
6 GPI 6 Out Fast Forward tally out (Open collector)
7 GPI 7 Out None
8 GPI 8 Out None
9 Common Ground
10 GPI 1 In Record command
11 GPI 2 In Play command
12 GPI 3 In Stop command
13 GPI 4 In Rewind Command
14 GPI 5 In Fast Forward Command
15 GPI 6 In Pause
16 GPI 7 In None
17 GPI 8 In None
18 Common Ground
19 + 5 VDC
20 + 5 VDC
21 No Connection
22 No Connection
23 No Connection
24 No Connection
25 No Connection
26 No Connection
NOTE: There are no internal current limiting resistors for the open-collector Tally Outputs.
Limit each Tally Output current to 40ma.