DNF Controls 2034CL-L-PBIO VS.3.0 - Manual (Page 9)

9 2034CL-L, Vs.3.0, 300 Clip Instant Access System, Louth Protocol, PBIO Option
4. VIDEO SERVER SETUP
Select LOUTH Broadcast communications protocol on the VIDEO SERVER to be controlled.
If required, assign a serial port on the VIDEO SERVER through which the ST300 will control it.
NOTE: In LOUTH mode, the VIDEO SERVER O
NLY allows Full Record.
(INSERT and ASSEMBLE record modes are disabled.)
Setup is complete.
5. LOAD A CLIP
a.
Select a VTR by pressing VTR[1], VTR[2], or VTR[3].
b.
Press [CLIP LIST] to view the list of CLIP IDs that are resident on the Video Server.
The CLIP LIST indicator will turn on.
c. Press [LOAD] to create and load a new clip.
(Creating a clip is described in “CREATE A CLIP,” Section 11.)
OR
Turn the Wheel to view the existing CLIP IDs on the video server.
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll backward,
through the list of available CLIPs. Backward scrolling is limited to the last 10 CLIP IDs
viewed.
OR
Manually enter a clip ID using the ST300 numeric keypad, or Shotbox Qwerty keyboard.
d. Press [LOAD] to load the selected CLIP ID for playout.
e. Locate the clip to the desired IN time.
f. Repeat steps a-e until clips are loaded into the desired VTRs.
g. Set the GANG mode, if required.