DNF Controls 2034CL-L-PBIO VS.3.0 - Manual (Page 14)

14 2034CL-L, Vs.3.0, 300 Clip Instant Access System, Louth Protocol, PBIO
Option
c. RECORD A CLIP
NOTE: To record a clip, the video server must have enough memory to record the entire
clip. Video input must be connected to the Record Channel.
The ST300 Port selected for recording must be an Input Port [a ”-“ (minus) number].
1)
Set the desired record duration as described in Section 11.a., “SET THE
RECORD DURATION.”
2) Create a new name as described above in Section 11.b., “CREATE A NEW
NAME.”
3) Press [RECORD] to start recording.
4) Press [STOP] to stop recording.