Delay, Totamt – Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC User Manual

Page 28

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC

6. System operation

! copyright - 10/24/2001

USING DELAY TIME

The Delay Time Feature allows an operator to select the amount of time the scale should wait
before automatically advancing to the next ingredient of the recipe. This helps insure accuracy
for the ingredient amount. For example, if the delay time is set to 10 (seconds) and the preset
alarms are activated continuously, the auto-advance circuitry starts the Delay time Counter. If
the preset de-activates, the delay time counter is reset, therefore assuring that the preset weight
amount has to be met for the total delay time amount.

Setting Delay Time to

MANUAL

prevents the scale from EVER auto-advancing, regardless of the

weight.

If loading a batch using a recipe,

must be pressed twice to advance the recipe to the

next ingredient. See page 25:

To load a batch using a recipe

TO CHANGE THE DELAY TIME

1. Go to Menu 4 of the Long Form Setup and

select

DELAY

(see page 14:

To enter the Long

Form Setup

2. Press

to select the delay time (in seconds)

to wait before automatically advancing.

Delay Time Selections in Seconds
MANUAL, 1, 2, 3, 5, 7, 10, 20, 30, or 60

Set to MANUAL to prevent automatic advance

after the ingredient amount has been
reached.

3. Press

to store the setting.

4. Press and hold

and then press

return to normal Weighing Mode.

TO LOAD A BATCH USING A RECIPE

Either of the following methods can be used to load
a recipe while in the weighing modes:

Method 1

1. Press

until the desired recipe number is

displayed.

2. Press

to accept the recipe. Go to Step 4

(method 2).

delay

totamt