Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC - Manual (Page 14)

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC 6. System operation
11
! copyright - 10/24/2001
TO SELECT HOLD MODE Hold Mode prevents the displayed weight
from changing due to “zero shift” while
moving the scale.
Press to "hold" the displayed weight and enter
the Hold Mode.
! The scale is in Hold Mode if the word HOLD is
flashing on the display and the flashing hold weight
is only displayed for a brief time.
TO EXIT HOLD MODE
Press .
At this time the scale reactivates and adjusts the
Zero/Balance to maintain the gross weight
displayed. Small changes in weight can occur while
moving the scale system to new locations for
loading or unloading. This change is called "zero
shift" and is due to several factors including terrain
changes and mechanical stresses.
TO CANCEL HOLD MODE
Press .
Cancelling the Hold Mode prevents the scale from
adjusting the Zero/Balance and returns the system
to the normal weighing mode.
Use this if weight is accidentally added while scale
is still in Hold Mode.
hold
9850
% !
9850
%
!