Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC - Manual (Page 19)

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC 6. System operation
16
! copyright - 10/24/2001
TO START THE MIX TIMER There are two ways to start the Mix Timer.
Method 1
1. Press
to see the time currently set.
2. Press the and keys to change the
displayed value. The [Select] key increments
the "flashing" digit and the [Function] key
selects which digit of the display is flashing.
3. When the correct time has been entered or if the number displayed is acceptable, press
or to set the time and start the Mix Timer.
The display now reads HOURS, MINUTES, and SECONDS (HH:MM:SS), separated by colons
that flash every second.
Method 2
1. Use the numeric keypad to enter the amount of
time.
2. Press to enter the time and start the Mix
Timer. The display now reads HOURS,
MINUTES, and SECONDS (HH:MM:SS),
separated by colons that flash every second.
TO CLEAR THE MIX TIMER
Press either , or to select the
amount of time.
The scale clears the mix timer alarms and enters
the Weighing Mode.
TO RESTART THE MIX TIMER
Press twice without entering a numeric value
to start the mix timer using the time previously
entered.
00:01:43
1
1
2
or
00:01:44
2×
00:01:44
1
2
2
3
3
or
9850
% !