Digi-Star EZ 3200/EZ 3200V/EZ 3200V RC - Manual (Page 16)

Digi-Star Model EZ3200/EZ3200V/EZ3200V RC 6. System operation
13
! copyright - 10/24/2001
TO CLEAR THE PRESET ALARM
1. Press once to clear the preset alarm and
re-enter a new preset weight using the numeric
keypad.
2. Press
once to print the weight and clear
the preset.
3. Press twice to clear the preset alarm and
return to Net Mode. This sets the display to 0
(zero) and returns the scale to Net Mode.
TO CLEAR THE PRESET ALARM USING THE TR OPTION
If you are reloading a preset amount and the preset alarm is activated, the alarm can be cleared
using the Remote Enter Preset Feature.
This feature is set in the Long Form Setup by setting Remote Input to PRESET. It is activated by
using the handheld TR (Transmitter/Receiver) option or by momentarily connecting the Remote
Input line in the power cord to 0.0 Vdc (Ground).
Using the Remote Zero feature of the TR option or Remote Input line in the power cord will also
clear the preset.
0
(2×)
1
3
2