Digi-Star EZ4300 - Manual (Page 15)

Operators Manual
D3655 11
Line 2
The zone number:
The name of the recipe:
The call weight of this pen:
Line 3
The gross weight:
Instruction data:
When the pen and the call weight is being displayed, begin unloading to the pen.
The pen call weight will begin counting down towards zero.
As the weight approaches zero, the alarm light and buzzer will begin to sound.
Once you have reached the preset weight you have two options to advance to the
next pen:
Manual Advance: Press [Advance] or [Print].
Automatic Advance: Weight reaches the tolerance percentage and the
timer runs out.
Note: For more information on how to setup the automatic mode refer to page:14
Pen Direct Access
Pens can be selected in three different ways:
Press [Pens], keep pressing [Pens] to locate desired pen.
Press [Pens] and then the arrow keys t locate the desired pen.
Enter a pen name or number and then press the [Pens] key.
By entering the pen name or number and pressing the [Pens] key, the pen will be
automatically started. To move to a section in the list of pens, enter the first few
digits of the pen name or number and press the [Pens] key. This will move you to
the pens in the list starting with those digits.
Note: To enter a letter on the keypad, press and hold the key with the letter required.
The display will then change to display the letters on that key.