Digi-Star EZ4300 - Manual (Page 14)

EZ 4300
10
Once you have reached the preset weight you have two options to advance to the
next pen:
Manual Advance: Press [Advance] or [Enter] to advance to next ingredient.
Automatic Advance: Weight reaches the tolerance percentage and the timer
runs out.
Note: For more information on how to setup the automatic mode refer to page:14
Recipe and Pen List Mode
Press [Pens] to access the “Pens List”.
The scale will display the following:
Press [Pens] or [ ] to change pen.
Press [Load/Unload] or [Enter] to start pen delivery.
The scale will display the following:
The upper display will
flash between the pen
and the call weight.
Line 1
The feeding number:
The number of rotations during this pen delivery: (RC option only)
The pen name:
!