DH Satellite 39 Polar Or Az-EL Series - Manual (Page 8)

BOLT BAG: FOR THE 39” POLAR “A” MOUNT
Ring to Dish 6 Tab
6- ½” x 1 ½” Bolts
6- ½” Lock Washers
6- ½” Nuts
6- ½” Steel Washers
12- ½” Rubber Washers
Ring to Dish 8 Block
8- ½” x 3” Bolts
8- ½” Lock Washers
8- ½” Nuts
8- ½” Steel Washers
16- ½” Rubber Washers
NOTE: SECTIONAL ANTENNAS INCLUDE ADDITIONAL
HARWARE, SEE TABLES BELOW
Page 8
NOTE:
Stainless steel or DURA-CON® hardware provided.
*DURA-CON® is a corrosion resistant coating.
DURA-CON®: Problem of thread-galling is eliminated.
C14F
C hap a rral
Feed Ass e m bly
1- Set of 4 Struts
1- C
o llar (C, Ku)
8- 1 ½” x 1/4” Bolts
8- ¼” Lock Washers & Nuts
Ku4FL/Ku3FL 3PC
Add to C14F/C13F
3- Section to 3pc collar
3 8-32 x 1” Bolts
3PC Collar for Ku4FL/Ku3FL
Use to Attach to Horseshoe of C14F/C13F
3 8-32 x ¾” Bolts
3- #8 Fender Washers
3 8-32 Nuts
C13F
C hap a rral
Feed Ass e m bly
1- Set of 3 Struts
1- C
o llar (C, Ku)
6- 1 ½” x 1/4” Bolts
6- ¼” Lock Washers & Nuts
Turnbuckle
1- Turnbuckle
2- ½” x 1 ½” Bolts
2- ½” Lock Washers
2- ½” Nuts Locking Bar
2- 1/8” x 1 ½” x 25” Flat Lock Bars
3- ½” x 1 ½” Bolts
3- ½” Nuts
3- ½” Lock Washers Saddle to Boom
1- ½” x 5” Bolt
2- ½” Bearings
3- ½” Lock Washers
3- ½” Nuts
Angles to Ring
8- ½” Nuts
Template Rib Hardware: Sectional
Antenna Size ¼” x ¾” Bolts ¼” Lock Washers ¼” Nuts
2.4M 36 36 36
2.7M 40 40 40
Splice Straps: Sectional
Antenna Size Splice Straps ¼” x ¾” Bolts ¼” Lock Washers ¼” Nuts
2.4M 4 8 8 8
2.7M 4 8 8 8
Back Braces Optional on 2.7M
4- Back Braces
4- ½” x 1 ½” Bolts
12- ½” Nuts
4- ½” Lock Washers
4- 3/8” x 1 ½” Bolts
4- 3/8” Lock Washers & Nuts
8- ¼” x ¾” Bolts
8- ¼” Lock Washers & Nuts
4- Bent Tabs
4- Brace Clips