DFI KB160 - Manual (Page 28)

www.dfi .com
28
Chapter 2 Hardware Installation
Chapter 2
LAN LED Connector
The LAN LED connector is used to detect the connection state of RJ45 LAN ports when the
connection is made to an active network via a cable. The pin functions of the LAN LED con-
nector are listed below.
8 7
2 1
Pins Pin Assignment Pins Pin Assignment
1 Link Activity 2 +3V_standby
3 GLED_LED_1000- 4 GLED_LED_100-
5 Link Activity 6 +3V_standby
7 GLED_LED_1000- 8 GLED_LED_100-
LAN 1 State
LAN 1 State
LAN 2 State
LAN 2 State
EXC Power Connector
Pins Pin Assignment Pins Pin Assignment
1 +12V 2 +12V
3 +12V 4 GND
5 GND 6 GND
7 +5V 8 +12V_IN
9 +5V 10 +12V_IN
11 +5V 12 +12V_IN
13 GND 14 +12V_IN
15 +3.3V 16 +12V_IN
17 +3.3V 18 GND
19 GND 20 GND
The EXC power connector provides the power supplement for an EXC card to operate when
the EXC card is installed into the EXC interface. The pin functions of the EXC power connector
are listed below.
1 2
19 20
EXC
power